Introduction
Keeping your RV water tank clean and sanitized is essential for ensuring safe and healthy water supply during your travels. Regular maintenance and proper sanitization of the water tank can help prevent the growth of bacteria, algae, and other contaminants. In this article, we will discuss the step-by-step process of sanitizing an RV water tank to ensure clean and safe water for your adventures.
Gather the Necessary Materials
Before you start sanitizing your RV water tank, make sure you have the following materials:
Materials used:
– RV water tank sanitizer (such as chlorine bleach or specialized RV sanitizers)
– Clean water hose
– Measuring cup
– Rubber gloves
– Safety goggles
Drain and Flush the Water Tank
The first step in sanitizing your RV water tank is to drain and flush out any existing water. Follow these steps:
1. Park your RV in a location where you can safely drain the water tank.
2. Turn off the water supply to the RV and disconnect any external water sources.
3. Open all faucets and drains inside the RV to release the pressure and facilitate drainage.
4. Locate the water tank drain valve (usually located underneath the RV) and open it to allow the water to drain completely.
5. Once the tank is empty, close the drain valve and close all the faucets and drains.
Mix the Sanitizing Solution
Next, you need to prepare a sanitizing solution to clean the water tank. The most commonly used sanitizers are chlorine bleach or specialized RV sanitizers. Follow these steps:
1. Refer to the manufacturer’s instructions on the sanitizer bottle for the recommended amount to use based on your tank’s capacity.
2. Put on rubber gloves and safety goggles to protect yourself from the sanitizer.
3. Mix the recommended amount of sanitizer with clean water in a measuring cup.
4. Stir the solution well to ensure proper mixing.
Sanitize the Water Tank
Now that you have the sanitizing solution ready, it’s time to sanitize the RV water tank. Follow these steps:
1. Pour the sanitizing solution into the water tank through the freshwater inlet.
2. Fill the tank with clean water until it is almost full.
3. Close the freshwater inlet and turn on the water pump.
4. Open all the faucets and drains inside the RV, one at a time, until you smell the sanitizer coming out.
5. Close each faucet and drain after the sanitizer has flowed through.
6. Let the sanitizing solution sit in the tank for at least 12 hours to effectively kill any bacteria or contaminants.
7. After the recommended time has passed, drain the tank again following the same process as before.
8. Rinse the tank thoroughly by filling it with clean water and draining it multiple times until the water runs clear.
Conclusion
Regularly sanitizing your RV water tank is crucial for maintaining clean and safe water during your travels. By following the step-by-step process outlined in this article, you can ensure that your water tank remains free from bacteria and contaminants. Remember to always follow the manufacturer’s instructions for any sanitizing products used.
References
– rvshare.com
– theadventuretravelers.com
– rvrepairclub.com
