Introduction
Putting a new line on a fishing pole is an essential skill for any angler. Whether you’re a beginner or an experienced fisherman, knowing how to properly replace the line on your fishing pole is crucial for successful fishing trips. In this article, we will guide you through the step-by-step process of putting a new line on a fishing pole, ensuring that you have the knowledge and skills to do it effectively.
Gather the Materials
Before you start, it’s important to gather all the necessary materials. Here’s what you’ll need:
Fishing line: Choose a fishing line that is suitable for your fishing needs. Consider the type of fishing you’ll be doing, the target species, and the fishing conditions.
Scissors or line cutter: You’ll need a sharp pair of scissors or a line cutter to cut the fishing line.
Backing line (optional): If you’re using a spinning reel or a baitcasting reel, you may want to use a backing line to fill up the spool partially before attaching the main fishing line. This helps to prevent slippage and improves casting performance.
Remove the Old Line
The first step is to remove the old line from your fishing pole. Start by cutting the line near the reel, leaving a few inches of line attached. If there is a line holder or a line clip on your reel, secure the line to it to prevent it from unraveling. Next, reel in the line until all the old line is removed from the spool.
Attach the Backing Line (if applicable)
If you’ve chosen to use a backing line, now is the time to attach it. Take the end of the backing line and tie it securely to the spool using an arbor knot. Make sure the knot is tight and trim any excess line.
Attach the New Fishing Line
To attach the new fishing line, start by threading the end of the line through the rod guides, starting from the tip and working your way down to the reel. Leave a few inches of line hanging from the tip of the rod.
Next, tie an arbor knot around the spool of the reel. To do this, make a loop with the end of the line and pass it over the spool. Bring the end of the line through the loop and pull it tight. Make sure the knot is secure.
Spool the Line
Now it’s time to spool the line onto the reel. Hold the fishing line with your hand, applying slight tension, and start reeling in the line. Make sure the line is evenly distributed across the spool and avoid any overlapping or tangling. Continue reeling until you have filled the spool to the desired level, leaving a small gap between the line and the edge of the spool.
Trim and Secure the Line
Once the line is spooled, use scissors or a line cutter to trim the excess line, leaving about 1/8 inch of line hanging from the edge of the spool. This will prevent the line from slipping or unraveling.
To secure the line, you can use a small piece of electrical tape or a line clip if your reel has one. This will keep the line in place and prevent it from coming loose during your fishing trips.
Conclusion
Putting a new line on a fishing pole is a straightforward process that every angler should know. By following the steps outlined in this article, you can ensure that your fishing line is properly replaced, allowing for smooth casting and successful fishing trips.
Remember to choose the right fishing line for your needs, remove the old line, attach a backing line if necessary, tie secure knots, and spool the line evenly onto the reel. With these skills, you’ll be ready to hit the water with confidence.
References
– Bass Pro Shops: www.basspro.com
– Fishing.com: www.fishing.com
– Outdoor Life: www.outdoorlife.com
