Introduction

Underwire bras are a popular choice for many women due to the support and lift they provide. However, over time, the underwire may start to poke through the fabric, causing discomfort and potentially damaging the bra. While moleskin is commonly used to fix this issue, there are alternative methods available. In this article, we will explore how to fix an underwire bra without using moleskin.

Use a Sewing Kit

Materials needed: Sewing needle, thread, scissors, and a thimble (optional).

If you have basic sewing skills, you can easily fix an underwire bra using a sewing kit. Here’s how:

1. Locate the area where the underwire is poking through the fabric.
2. Carefully remove the underwire from the bra.
3. Use a sewing needle and thread to stitch the hole or tear in the fabric. Make sure to secure the stitches properly to prevent the underwire from poking through again.
4. Once the fabric is repaired, reinsert the underwire back into the bra.
5. Test the bra to ensure that the underwire is no longer poking through.

Use Silicone Underwire Covers

Materials needed: Silicone underwire covers.

Silicone underwire covers are a great alternative to moleskin as they provide a protective barrier between the underwire and your skin. Here’s how to use them:

1. Purchase silicone underwire covers from a lingerie store or online retailer.
2. Remove the underwire from the bra.
3. Slide the silicone underwire cover onto the underwire, covering the area that was poking through.
4. Reinsert the underwire back into the bra.
5. Adjust the position of the silicone cover to ensure it provides adequate protection.
6. Test the bra to ensure that the underwire is no longer poking through.

Apply Fabric Glue

Materials needed: Fabric glue.

Fabric glue can be used as a temporary fix for an underwire bra. Here’s how to do it:

1. Locate the area where the underwire is poking through.
2. Remove the underwire from the bra.
3. Apply a small amount of fabric glue to the area where the underwire is poking through.
4. Press the fabric together firmly to ensure it adheres to the glue.
5. Allow the glue to dry completely before reinserting the underwire back into the bra.
6. Test the bra to ensure that the underwire is no longer poking through.

Conclusion

While moleskin is commonly used to fix underwire bras, there are alternative methods available. By using a sewing kit, silicone underwire covers, or fabric glue, you can easily repair an underwire bra without the need for moleskin. Remember to follow the instructions carefully and test the bra to ensure that the underwire is no longer poking through.

References

– www.lingerie.com
– www.amazon.com
– www.sewing.com